Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Weeks 4 – 6
Skip to content
Measuring the offset of the hub from the rim with calipers
Demonstration of how the clutch works
Cleaning the stator
Micah teaching the class how to thread a hole in metal
Cutting valve seats
Pulling the struts off the dirt guard in preparation for powder coating
Taped up holes on the oil tank so that nothing gets in during powder coating
Soldering new wires for the stator testing ring
Cleaning the kickstand
Cleaning the threads in the rear wheel hub with a 12-24 tap
Polishing the engine cover with a drill and scotch brite
After cleaning the oil pump in the parts cleaner
John explaining the tail lamp switch
Cleaning the spokes with the ultrasonic cleaner
Cleaning internal threads with Q-tips
Cleaning external threads
Notes on the electrical system
Figuring out how to explain the transmission and gears
Our new motorcycle lift